Kia Sorento: Rear Stabilizer Bar Inspection

Rear Stabilizer Bar Removal

1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Rear Cross Member Replacement

1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Auto Head lamp leveling Unit Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

Spark Plug Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Air Ventilation Seat Description
Air ventilation seat It blows the indoor air through the blower fan installed at the seat cushion and back lower part, and supplies the air into the seat cushion and the seat back through ...