Kia Sorento: Rear Assist Arm Inspection

Rear Assist Arm Removal

1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Rear Stabilizer Bar Removal

1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

See also:

Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the brakes automat ...