Kia Sorento: Components
| 2WD |
| 1. Rear upper arm 2. Rear stabilizer bar 3. Rear lower arm 4. Rear assist arm |
5. Rear shock absorber 6. Rear cross member 7. Trailing arm |
| 4WD |
| 1. Rear assist arm 2. Rear cross member 3. Rear drive shaft 4. Rear upper arm |
5. Rear coil spring 6. Rear stabilizer bar 7. Rear shock absorber 8. Rear lower arm |
Rear Shock Absorber Removel
2WD
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...
See also:
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor pr ...
Torque Converter Control Solenoid Valve (T/CON_VFS)
Torque converter control solenoid valve (T/CON) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the torque converter.
...
Copyright В© www.ksmanual.com 2014-2024