Kia Sorento: Direct Electro Hydraulic Actuator Coupling Inspection
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Direct Electro Hydraulic Actuator Coupling Inspection
All units are filled up with coupling fluid (ultra-low viscosity
ATF) prior to shipping. Inspection, fill-up, and replacement of coupling
fluid is therefore not necessary (zero maintenance, lifetime fluid).
|
Direct Electro Hydraulic Actuator Coupling Operation
Electronic Coupling
[Inactive]
[Active]
Operation Order
1.
4WD ECU receives CAN signals from the vehicle's sensors.
...
Direct Electro Hydraulic Actuator Coupling Removal
Coupling Maintenance Precautions
Maintain the coupling at a horizontal level.
•
...
See also:
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring Spec.)
1
GND
DC Ground
TMU
Battery
...
Component Location
1. Audio unit
2. Tweeter speaker
3. External amplifier
4. Roof antenna (Radio + Siruis)
5. Front door speaker
6. Rear door speaker
7. Antenna feeder cable
8. Antenn ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026