Kia Sorento: 4WD ECU Circuit Diagram

4WD ECU Circuit Diagram and Connector

4WD ECU Connector Pin Function 1 MOTOR A 2 MOTOR B 3 LOCK MODE SWITCH (Input) 4 - ...

4WD ECU Removal

1. Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing with the GDS tool. (Refer to 4WD Control System - "Repair procedures") ...

See also:

Engine Control Module (ECM) Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the ECM Connector (A). ...

Brake Booster Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Front Wheel Speed Sensor Removal
1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...