Kia Sorento: 4 Wheel Drive (4WD) System

Shift Cable Adjustment

Adjusting method for T/M control cable 1. Set room side shift lever and T/M side manual control lever to "N" position. 2. ...

Specifications

Tightening Torques Items N.m Kgf.m lb-ft Transfer assembly mounting bolts 60.8 ~ 65.7 6.2 ~ 6.7 44.8 ~ 48.5 ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refe ...

Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

Rear Cross Member Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...