Kia Sorento: Shift Cable Adjustment - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Shift Cable Adjustment

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Adjustment

Adjusting method for T/M control cable
1.
Set room side shift lever and T/M side manual control lever to "N" position.
2.
Connect room side shift lever and shift cable.
3.
Push cable to "F" direction shown to eliminate FREE PLAY.
4.
Tighten adjusting nut (A).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

5.
After adjusting according check to be sure that this part operates surely at each range of T/M side corresponding to each position of shift lever.
Shift Cable Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

4 Wheel Drive (4WD) System
...

See also:

Balance Shaft & Oil Pump Components
1. Balance shaft & oil pump assembly 2. Balance shaft chain tensioner 3. Balance shaft chain 4. Balance shaft chain sprocket 5. Balance shaft chain guide 6. Balance shaft ...

Engine Oil: Oil and filter replacement
   • Prolonged and repeated contact with mineral oil will result in the removal of natural fat ...

Auto Light Sensor Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw ( ...

Copyright www.ksmanual.com 2014-2026