Kia Sorento: Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
| Control Pressure kpa (kgf/cm², psi) |
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23) |
| Current value(mA) |
0 ~ 850 |
| Internal resistance(Ω) |
5.1 ± 0.3 |
Torque Converter Control Solenoid Valve (T/CON_VFS)
Torque converter control solenoid valve (T/CON) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the torque converter.
...
Circuit Diagram
...
See also:
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spill ...
Balance Shaft & Oil Pump Installation
BSM(Balance Shaft Module) Chain System
1.
The key of crankshaft should be aligned with the mating face of main
bearing cap. As a result of this, the piston of No.1 cylinde ...
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026