Kia Sorento: Accelerator Pedal Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Accelerator Pedal Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Accelerator Pedal Installation

1.
Install in the reverse order of removal.

Accelerator pedal module installation nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Delivery Pipe Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

See also:

Fuel Filler Door Release Actuator Inspection
1. Remove the fuel filler cover (A) after loosening screws (2EA). 2. Remove the fuel filler door module (A). ...

Heated Steering wheel System Circuit Diagram
Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Engine Oil: Oil and filter replacement
   • Prolonged and repeated contact with mineral oil will result in the removal of natural fat ...

Copyright www.ksmanual.com 2014-2026