Kia Sorento: Circuit Diagram

Signal Waveform

...

Inspection

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

See also:

Fluid Component Location
1. ATF Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

Cooling Fan Disassembly
1. Remove the cooling fan (A) after loosening the screws (B) from the cooling assembly. Tightening torque: 2.7 ~ 3.2 N.m (0.28 ~ 0.3 ...

Engine Control Module (ECM) Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the ECM Connector (A). ...