Kia Sorento: Circuit Diagram

Specification

Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...

See also:

Receiver-Drier Replacement
1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tight ...

Blind Spot Detection Unit Inspection
BSD Unit Alignment To sense the cars exactly in the next lane with the radar, the direction of the sensor and the direction of the vehicle have to align. This is BSD unit alignm ...

Fuel Pressure Regulator Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump�) 2. Release the fixing hooks, and then remove the regulator c ...