Kia Sorento: Fuel Filler Cap Description

A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

Canister Installation

1. Install in the reverse order of removal. ...

Fuel Tank Air Filter Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

See also:

Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module rece ...

ATF Warmer Description
The ATF warmer is mounted on the valve body cover to reduce oil viscosity friction by increasing oil temperature under cold condition, which in turn improves fuel efficiency. It is serial mou ...

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of below items; - Fill vent valve - F ...