[1st Method] |
1. |
Start the engine and keep the engine running at idle for 2 minutes.
|
2. |
Step on the accelerator pedal and hold it steady at 4500 rpm with
the shift lever in N position to warm up the engine until the
temperature of the engine coolant reaches 80°C.
|
3. |
Keep the engine running at 2500~3000 rpm in the N position for
15 minutes.
|
[2nd Method] |
|
1. |
Start the engine and keep the engine running at idle for 2 minutes.
|
2. |
Drive the vehicle for over 20 minutes, keeping the engine speed
above 3500 rpm.
|
ESC Control Module Removal
1.
Turn the ignition switch OFF.
2.
Remove the surge tank. [G3.3 GDI]
(Refer to Engine Mechanical System - "Surge Tank")
...
Signal Waveform
...
Windshield Wiper-Washer Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after loosening
3 screws.
...