Kia Sorento: Muffler Components

Exhaust Manifold Removal and Installation

1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the front oxygen sensor ...

Muffler Removal and Installation

1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

See also:

Starter Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

High Mounted stop lamp Installation
1. Install the high mounted stop lamp. 2. Install the tailgate trim. ...

Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module rece ...