Kia Sorento: Engine Mounting Components

Engine Room Under Cover Removal and Installation

1. Unfasten the fasteners and bolts and then remove the engine room under cover (A). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf ...

Engine Mounting Removal and Installation

Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...

See also:

Specifications
ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

Rear Hub - Carrier Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...

Component Location (1)
1. Buzzer 2. Console S/W 3. RKE 4. Anti Pinch Strip 5. Spindle Drive 6. Tailgate Trim Switch 7. Power Latch 8. PTG Control Module 9. Anti Pinch Strip 10. Body ...