Kia Sorento: Front seat adjustment - power (if equipped) - Seats - Safety features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Front seat adjustment - power (if equipped)

Second Generation XM (2011-2024) / Kia Sorento XM Owners Manual / Safety features of your vehicle / Seats / Front seat adjustment - power (if equipped)

The front seat can be adjusted by using the control switches located on the outside of the seat cushion.

Before driving, adjust the seat to the proper position so you can easily control the steering wheel, pedals and switches on the instrument panel.

WARNING

The power seat is operable with the ignition OFF. Therefore, children should never be left unattended in the vehicle.

CAUTION

Forward and backward

Push the control switch forward or backward to move the seat to the desired position.


Push the control switch forward or backward to move the seat to the desired position. Release the switch once the seat reaches the desired position.

Seatback angle

Push the control switch forward or backward to move the seatback to the desired


Push the control switch forward or backward to move the seatback to the desired angle. Release the switch once the seat reaches the desired position.

Seat height (for driver’s seat)

Pull the front portion of the control switch up to raise or press down to lower


Pull the front portion of the control switch up to raise or press down to lower the front part of the seat cushion.

Pull the rear portion of the control switch up to raise or press down to lower the rear part of the seat cushion. Release the switch once the seat reaches the desired position.

Lumbar support (for driver’s seat)

The lumbar support can be adjusted by pressing the button.


The lumbar support can be adjusted by pressing the button.

Front seat adjustment - manual
Forward and backward To move the seat forward or backward: 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sur ...

Driver position memory system (if equipped, for power seat)
A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the system ...

See also:

Brake Line Removal
1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...

Rear Disc Brake Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Engine Mounting Removal and Installation
Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...

Copyright © www.ksmanual.com 2014-2024