Kia Sorento: Front seat adjustment - manual - Seats - Safety features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Front seat adjustment - manual

Second Generation XM (2011-2024) / Kia Sorento XM Owners Manual / Safety features of your vehicle / Seats / Front seat adjustment - manual

Forward and backward

To move the seat forward or backward:


To move the seat forward or backward:

1. Pull the seat slide adjustment lever up and hold it.

2. Slide the seat to the position you desire.

3. Release the lever and make sure the seat is locked in place.

Adjust the seat before driving, and make sure the seat is locked securely by trying to move forward and backward without using the lever. If the seat moves, it is not locked properly.

Seatback angle

To recline the seatback:


To recline the seatback:

1. Lean forward slightly and lift up the seatback recline lever.

2. Carefully lean back on the seat and adjust the seatback of the seat to the position you desire.

3. Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.)

Seat height (for driver’s seat)

To change the height of the seat, push the lever upwards or downwards.


To change the height of the seat, push the lever upwards or downwards.

Lumbar support (if equipped)

The lumbar support can be adjusted by pressing the lumbar support switch on the


The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.

1. Press the front portion of the switch to increase support, or the rear portion of the switch, to decrease support.

2. Release the switch once it reaches the desired position.

Seats
Front seat (1) Forward and backward (2) Seatback angle (3) Seat cushion height (Driver’s seat) (4) Lumbar support (Driver’s seat) (5) Seat warmer /Seat cooler (Air ventilation seat) (6) H ...

Front seat adjustment - power (if equipped)
The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so you can easily control the steerin ...

See also:

Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mech ...

Front Wheel Transfer Assembly Components Location
1. Under cover 2. Transaxle Assembly 3. Transfer assembly 4. Propeller shaft 5. Coupling assembly 1. Under cover 2. Transaxle Assembly 3 ...

Copyright © www.ksmanual.com 2014-2024