Kia Sorento: Auto Defogging Sensor Inspection

To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.

Auto Defogging Sensor Description

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module rece ...

Auto Defogging Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging sensor cover (A). 3. Disconnect t ...

See also:

Fluid Service Adjustment Procedure
Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

Relay Box (Engine Compartment) Inspection
1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay box. Power Relay (Type A) ...

Alternator Specification
Alternator Item Specification Rated voltage 13.5V, 130A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC Regulator bui ...