Kia Sorento: AC Inverter Oultet Installation

AC Inverter Oultet Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the rear console cover. (Refer to Body - "Console") ...

AC Inverter Switch Removal

   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

See also:

Flex Steering Instruction
Flex Steering is system to choose the three modes power steering depending on driver preference or driving conditions.    ...

Front Lower Arm Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver while driving. It senses the rear side territory of the vehicle and provides information to the driver. ➀ BSD ...