Kia Sorento: Start/Stop Button Inspection
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Inspection
| 1. |
It will be able to diagnose defects of Smart key with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
| 2. |
Select model and "Smart key system(Button start)" menu.
|
| 3. |
Select "Current Data", if you want to check current data of smart
key system.
It provides the input/output status of each module.
|
| 4. |
If you want to check smart key system operation forcefully, select
"Actuation test".
|
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the start/stop button cover.
3.
Install the crash pad lower panel. ...
See also:
Smart key unit Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing (A).
(Refer to Body - "Crash pa ...
ESC OFF Switch Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer the Body - & ...
Description
BSD is a system that uses two magnetic wave radar sensors attached on
the rear bumper to measure the distance from the following vehicles and provides
the sensing and (visual and auditory) al ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026