Kia Sorento: Start/Stop Button Installation

Start/Stop Button Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

Start/Stop Button Inspection

1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. ...

See also:

Installation
1. Install in the reverse order of removal.    If the oil seal on the trans ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts with the specified tightening order. ...

Brake Booster Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly. G 2.4 GDI (Refer to ...