Kia Sorento: Overhead Console Lamp Inspection - Lighting System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Overhead Console Lamp Inspection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.

Room Lamp Installation
1. Install the room lamp assembly after connecting the lamp connector. 2. Install the lamp lens after assembling the bulb. ...

Overhead Console Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the mounting screws (2EA). And then remove the overhead console (A). ...

See also:

Parking Assist Sensor Installation
1. Install the rear ultra sensor after connecting the connector. 2. Install the rear bumper cover. 3. Connect t ...

Fuel Tank Installation
1. Install in the reverse order of removal. Fuel tank band installation bolt: 44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft) ...

Specification
Item Specification Coil resistance (Ω) 30.0 ~ 35.0 [20°C(68°F)] ...

Copyright www.ksmanual.com 2014-2026