Kia Sorento: Head Lamps Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Head Lamps Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Lighting System / Head Lamps Installation

1.
Install the head lamp bulbs.
2.
Reassemble the head lamp bulb covers.
3.
Reassemble the head lamp assembly after connecting the lamp connector.
Head Lamps Removal
   Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turn ...

Head Lamps Replacement
Bulb (HID) 1. Turn the head lamp switch off. 2. Disconnect the power connector from the lamp. 3. Remove the ...

See also:

Power Door Mirror Switch Inspection
1. Remove the front door trim and power door mirror switch module (A). (Refer to Body - "Front door") 2. Check fo ...

Auto Light Sensor Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...

Rear Lower Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Copyright www.ksmanual.com 2014-2026