Kia Sorento: Removal

Inspection

Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cov ...

Installation

1. Install the mirror making sure the mounting bracket not to be damaged. 2. Install the mirror wiring cover after reconnecting the connect ...

See also:

Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear bumper to measure the distance from the following vehicles and provides the sensing and (visual and auditory) al ...

Door Mood Lamp Removal
1. Disconnect the negative battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door") ...

Rear Blower Resister Inspection
1. Measure terminal-to-terminal resistance of the blower resistor. 2. If the measured resistance is not within specification, the blower re ...