Kia Sorento: Front Washer Motor Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Windshield Wiper/Washer / Front Washer Motor Installation

1.

Reassemble the washer reservoir.

Before installing the pump motor, check the filter for foreign material or contamination. if necessary, clean the filter into the pump motor.

2.	Connect the washer motor connector and washer hose.

3.	Install the washer motor.

4.	Reassemble the front bumper cover.

Front Washer Motor Removal

- When servicing the washer pump, be careful not to damage the washer pump seal. ...

Rear Wiper/Washer

...

See also:

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

Rear Shock Absorber Installation
1. Installation is the reverse of removal. After checking the distance 45 ...

Windshield wipers
Operates as follows when the ignition switch is turned ON. MIST/ : For a single wiping cycle, move the lever to this (MIST/ ) position andrelease it. The wipers will operate continuously if the l ...

Categories

Copyright © www.ksmanual.com 2014-2026