Kia Sorento: PTG Spindle Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: PTG Spindle Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / PTG Spindle Installation

1.
Connect the PTG spindle, bracket and connector.

Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)

2.
Install the tailgate trim and Luggage side trim.
3.
Connect the negative (-) battery terminal.
PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate& ...

Windshield Wiper/Washer
...

See also:

Rear Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer p ...

Fuel Filter Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). ...

Rear Differential Carrier Component
1. Rear Differential Carrier 2. Coupling Assembly ...

Copyright © www.ksmanual.com 2014-2024