Kia Sorento: Power Tailgate Unit Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Unit Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear left luggage side trim.
(Refer to Body - "Interior Trim")
|
| 3. |
Remove the power tailgate unit (A) connectors after loosening
mounting nuts (2EA).
|
Power Tailgate Unit Installation
1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) bat ...
See also:
Direct Electro Hydraulic Actuator Coupling Inspection
All units are filled up with coupling fluid (ultra-low viscosity
ATF) prior to shipping. Inspection, fill-up, and replac ...
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
...
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026