Kia Sorento: Power Door Lock Switch Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Removal
Driver Power Window Main Switch
| 1. |
Disconnect the negative battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front door")
|
| 3. |
Remve the screws(Inside:4EA, outside:1EA) from power window switch
assembly (A) and connectors (B).
|
| 4. |
Remove the power window switch assembly (A) from front door trim.
|
Passenger window switch
| 1. |
Disconnect the negative battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front door")
|
| 3. |
Remove the passenger window switch assembly (A) from front door
trim.
|
| 4. |
Remove the passenger window switch assembly (A) from front door
trim.
|
Power Door Lock Actuators Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front door module.
...
Power Door Lock Switch Installation
Driver Power Window Main Switch
1.
Install the driver power window switch assembly and connectors.
2.
Install the front door trim.
...
See also:
Components Location
1. Purge Control Solenoid Valve (PCSV)
2. Vapor line
3. Fuel tank air filter
4. Canister Close Valve (CCV)
5. Canister
6. Fuel Tank Pressure Sensor (FTPS)
...
Inspection
1.
Remove the cowl top cover.
(Refer to the wiper)
2.
Disconnect the windshield deicer connector (A) from the wiper
motor linkage.
...
Blind Spot Detection Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026