Kia Sorento: Power Seat Control Switch Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Seat Electrical / Power Seat Control Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the power seat control switch (A).
(Refer to Body - "Front seat")
|
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Power Seat Control Switch Installation
1.
Install the power seat control switch after connecting the connector.
...
See also:
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
...
Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
ESC Control Module Installation
1.
Installation is the reverse of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026