Kia Sorento: AC Inverter Unit Installation - AC Inverter System - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: AC Inverter Unit Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / AC Inverter System / AC Inverter Unit Installation

1.
Install the AC inverter unit.
2.
Install the luggage side trim.
3.
Connect the negative (-) battery terminal.
  
-
Before starting repair work, turn off the engine and AC inverter.
-
You may get electrocuted if you work with the AC inverter on.
-
You may get electrocuted if you work on the AC inverter with you hands wet.
AC Inverter Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the right luggage side trim. (Refer to Body - "Luggage Side Trim") ...

AC Inverter Oultet Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear console cover. (Refer to Body - "Console") ...

See also:

Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solen ...

Installation
1. Install the key lock cylinder. 2. Install the illumination bulb, lens and cover. 3. Install the key warning ...

Component Location
1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch) 4. Horn (High pitch) 5. Clock spring ...

Copyright © www.ksmanual.com 2014-2019